gear pump, hydraulic pump, pto, cable control, drive shaft- Richland Mould Corp.

No.	Specification	Total length(L1) MM	Length of tube(L2) MM	Stroke(L3) MM
1	PTO-1600	1600	1310	58
2	PTO-1800	1800	1510	58
3	PTO-2000	2000	1710	58
4	PTO-2200	2200	1910	58
5	PTO-2300	2300	2010	58
6	PTO-2500	2500	2210	58
7	PTO-2800	2800	2510	58
8	PTO-3000	3000	2710	58
9	PTO-3200	3200	2910	58
10	PTO-3500	3500	3210	58
11	PTO-3800	3800	3510	58
12	PTO-4000	4000	3710	58
13	PTO-4200	4200	3910	58
14	PTO-4500	4500	4210	58
15	PTO-4800	4800	4510	58
16	PTO-5000	5000	4710	58
17	PTO-5200	5200	4910	58
18	PTO-5500	5500	5210	58
19	PTO-5800	5800	5510	58
20	PTO-6000	6000	5710	58
21	PTO-6500	6500	6210	58
22	PTO-6800	6800	6510	58
23	PTO-7000	7000	6710	58
24	PTO-7500	7500	7210	58
25	PTO-8000	8000	7710	58
26	PTO-8500	8500	8210	58

Technical requirement: 1 The Min pull of the core's joint ≥ 7000N 2 The Min pull of the cannula'joint ≥ 3000N 3 The PTO cable control can be bending 360° under the stated Min bending rate of radius, and then it can be pull freely. The radius of bending rate is 150mm.